All Thingz Electric installs light fixtures, recessed lighting, outdoor lighting and lighting controls for homes in Aliso Viejo. We plan the layout, run new wiring where you need it, pull the permit when the job calls for one and leave every fixture working. You deal with one C-10 licensed contractor from estimate to final walkthrough.
Now Serving: Aliso Viejo, Laguna Niguel, Mission Viejo, Laguna Hills, Lake Forest, Dana Point, Laguna Beach, Irvine, and all of Orange County
Most lighting projects start with one of three goals: a brighter kitchen, a fixture that fits a remodel, or better light at the entry and yard. Some jobs mount a new fixture on an existing box. Others need a new circuit, a new switch location or wiring into a ceiling that has no box at all.
We look at the ceiling, the attic access and the circuit before we quote, so the price covers the real work. Our office is on Aliso Creek Road in Aliso Viejo, so jobs in the city stay close to home.
One crew handles the job from layout to cleanup. Choose a single fixture swap or a lighting plan for the whole house.
Chandeliers, pendants, flush mounts, vanity lights and lighted mirrors. We confirm the ceiling box is rated for the fixture’s weight and add a brace when it is not.
New recessed lights in finished ceilings and LED retrofits for old cans. Our recessed lighting installation page covers layout and spacing in detail.
Porch and garage lights, motion-sensor floodlights and path lighting. See our outdoor lighting installation page for exterior projects.
LED-compatible dimmers, vacancy sensors, smart switches and separate switching for under-cabinet lights.

The Mission Viejo Company planned Aliso Viejo, and the first homes went on sale in March 1982, according to the city’s history. If your home still has the lighting it was built with, look for these signs:
An update might swap old cans for airtight LED trims, add dimmers and sensors where the Energy Code calls for them, and replace dated fixtures in the kitchen, bath and entry. Planning a remodel? We wire the new lighting while the ceilings are open, and our recessed lighting team lays out the cans before drywall goes back up.
Each of these has a fix. We tell you which ones are worth doing now and which can wait.
Recessed lights for general light, pendants over the island and under-cabinet strips for the counters. California’s Energy Code requires under-cabinet lighting to be switched separately from the ceiling lights.
Layered light from recessed cans, a ceiling fixture and wall sconces. The Energy Code calls for wall-mounted dimmers on lighting in habitable rooms, with a few exceptions.
Vanity lights, lighted mirrors and a shower light rated for wet locations. At least one light in each bathroom must be on a vacancy or occupancy sensor.
LED fixtures in the garage, a bright light over the washer and closet lighting. Garages, laundry rooms and walk-in closets also need at least one sensor-controlled light.
Three-way and four-way switching so you control the light from each end, plus low-glare fixtures for stairwells.
Ceiling fixtures or fans with light kits, reading sconces and dimmers for evening use. Want a fan instead? See our ceiling fan installation service.
Price depends on the work behind the fixture, not only the fixture itself. These factors move a lighting quote up or down:
For recessed lights, our recessed lighting installation cost guide breaks down cost per light. You get a written quote before work starts.
The California Energy Commission requires installed luminaires and light sources in homes to be high efficacy. Under the 2025 Single-Family Compliance Manual, indoor LED fixtures and replaceable lamps must be JA8-certified, subject to the code’s listed exceptions. We verify certification on the fixture or lamp you choose before we install it.
New recessed downlights cannot use screw-base sockets, must carry an airtight label and must be sealed to the ceiling. The Energy Commission’s 2025 single-family lighting guide lets existing screw-base cans stay when you add JA8 retrofit trims.
Lighting controls are part of the code. These are the ones that come up most on residential jobs:
Whether a lighting job needs a permit depends on its scope, and the City of Aliso Viejo makes that call. We confirm requirements with the city before we start and pull the permit when one is required.
The city takes applications through its online permit portal, and City Hall is at 12 Journey, Suite 100. When we pull a permit, we schedule the inspection and meet the inspector, so the work is signed off before we close the job.
Not every lighting problem needs a new fixture. We trace flickering lights, dimmers that buzz with LED bulbs, lights that trip a breaker and switches that run warm. Common causes include a loose connection, a worn switch or a dimmer that is not rated for LED loads.
Our guide to flickering lights explains the common causes. A warm switch plate or a burning smell needs a licensed electrician right away.
We install lighting across Aliso Viejo, including Moulton Parkway, Laguna Audubon, Pacific Ridge and Glenwood. For other electrical work in the city, see our electrician in Aliso Viejo page. We also cover the neighboring cities:
For every lighting service we offer, visit our lighting services page.
1. C-10 Licensed Contractor: Licensed and insured electricians do the work.
2. Code-Compliant Lighting: Fixtures and controls meet California’s Energy Code.
3. Permits Handled: We pull the permit and meet the inspector when the job needs one.
4. Written, Upfront Quotes: You know the price before work starts.
5. Family Owned, 350+ Five-Star Reviews: Orange County homeowners have left us more than 350 five-star reviews.
Cost depends on whether there is an existing box, attic access, ceiling height, the number of fixtures, controls and permit fees. We give you a written quote before work starts. For recessed lights, see our recessed lighting installation cost guide.
It depends on the scope of the job, and the City of Aliso Viejo decides. We confirm requirements with the city before we start, pull the permit when one is required and meet the inspector.
Yes. We run wiring from a nearby circuit or a new circuit, install a box rated for the fixture and add a switch where you want it. Open attic space above the ceiling makes the job faster.
Yes. California Energy Commission guidance lets existing screw-base cans stay when you add JA8-certified LED retrofit trims. New recessed downlights must be airtight with no screw-base socket. See our recessed lighting installation page for more.
The dimmer is often not rated for LED loads, or the bulbs and dimmer do not match. We replace the dimmer with an LED-compatible model and check the connections on the circuit.
Yes. We confirm the ceiling box is rated for the fixture weight, add a brace when needed and bring a lift or scaffold for vaulted ceilings.
Yes. We install porch, garage, security and path lighting. See our outdoor lighting installation page for exterior projects.
Most single-fixture jobs finish in one visit. A room of new recessed lights usually takes about a day, depending on attic access. You get a time estimate with your quote.
Providing Residential and Commercial Electrical Services to Orange County
Call Us
Sun: 8:00am - 6:00pm Mon: 8:00am - 6:00pm Tue: 8:00am - 6:00pm Wed: 8:00am - 6:00pm Thu: 8:00am - 6:00pm Fri: 8:00am - 6:00pm Sat: 8:00am - 6:00pm